Icon legend


tswr  Switch, the ping is successful.

tswx  Switch, the ping is unsuccessful.

tswf  An access point or other device that supports SNMP, the ping is successful.

tswg  An access point or other device that supports SNMP, the ping is unsuccessful.

trj45Socket

thub  Hub, unmanaged switch, wireless access point, ... The program displays
  this icon if two or more MACs are detected on the switch port.

tws1End device (computer, printer, mobile device), the ping is successful.

tws0End device, the ping is unsuccessful.

pr1Printer, the ping is successful.

pr0Printer, the ping is unsuccessful.

thwsm15Mark the device that is monitored via ICMP ping.

tman  Tools

tbellrAlarm icon. Ping Monitor displays the red icon when a switch stops
responding to ping. See the log for details.

tbellyAlarm icon. Traffic monitor displays the yellow icon when traffic load
exceeded the configured threshold. Also, Ping Monitor displays this icon
when a monitored host stops responding to ping. See the log for details.

tbellgThe switch or monitored host resume responding to ping.

tnewIcon for the new MAC address. To remove the icon, click "View New"
button, then "Remove Mark" button.

traf  Bar chart of traffic load for the last 2 hours. Y-axis scale value is 100M
(100 Mbit/sec). Each X-axis pixel represents 2 minutes.
The dashed line shows the port bandwidth usage threshold specified in
Options (Options - Traffic).
The arrow to the right means that the outgoing traffic on the port prevails
over the inbound traffic within the last 10 minutes.

traf24  Bar chart of traffic load for the last 48 hours.
Each X-axis pixel represents 20 minutes.
Top line shows peak values.